Granite Foundation Repair Home  |  About Us  |  Contact Us
Call Monday - Friday 8.00 am - 5.00 pm
Dallas 972.412.2171   Fort Worth 817.870.1381
 What is your house telling you about Foundation Repair
 Crack in wall Foundation Repair  Ceiling cracks Foundation Repair
 Ceiling trim separation Foundation Repair  Window frame separation from brick or trim Foundation Repair

Foundation Repair Methods for Dallas and Fort Worth

Granite's proven foundation repair systems include:

  • Pressed steel piers
  • Helical steel piers
  • Pressed concrete pilings
  • Drilled or poured concrete piers
  • Tunneling

Tunneling is commonly used by Granite Foundation Repair when the homeowner does not want interior pier installation to damage a floor covering such as marble or tile. The method is very effective. It enables the precise location and installation of piers without any interior disturbance. The tunnel is typically 3 x 3 feet with length necessary to reach interior pier locations. After the work the tunnel is backfilled with a suitable material.

The steel pier, also called a steel piling is consistently the deepest driven pier providing the most foundation support.

  steel pier foundation repair

Steel Piers Installed to Bedrock
or Load Bearing Strata

   pressed concrete foundation repair

Pressed Concrete Pilings
To Load bearing Strata

In addition to piers, drainage correction systems including surface drains and French drains can also be provided to correct problem areas. Click here for extensive information on watering and drainage.

Moving? See our Foundation Tips for buyers and sellers.

To schedule a free evaluation or for telephone consultation call us now at 972-412-2171 or email us at Info@GraniteFoundationRepair.com

A closer look at foundation repair methods:

Granite's foundation repair solutions are situation dependent, based upon the age and style of foundation and house as well as the soil conditions and goals of the property owner.


 Granite's Model 2000 Steel Pier

Granite's steel pier provides the very best in long lasting foundation support with minimal impact on vegetation. Our robust steel pier is driven to solid rock or a hard load bearing strata at pressures of up to 6,000 PSI, and depths of as much as 80 feet. Time for foundation repair is typically 1 to 3 days. There are tens of thousands of steel pier installations in the Dallas Fort Worth area.

The amount of repair time is dependent upon the depth to which the pier system must be driven. The depth to which the pier system penetrates to rock or rock-like strata is not normally limited by soil moisture or soil density.

  • Bracket Material is steel, typically ASTM A-36
  • No Shims, No Pins, and No Concrete
  • Typical 60” pier section lengths, fewest connectors
  • pier shaft material is high carbon 2 7/8” O.D., steel
  • Shaft sections have a typical yield strength of 50 KSI
  • All joints include a steel overlap of approximately 6".
  • Piers individually driven to rock or hard, rock like load bearing strata.
  • Friction reduction collar used to assure maximum depth.

Helical steel piers are another system used by Granite for house leveling. Bracket material is the same as for Granite's steel piers. The first shaft section has one or more helical plates. Each section of steel is augured into the ground using a rotary hydraulic drive system. Extensions of steel pipe are typically 60" long.

Helical piers are typically driven to a pre-set load level to provide adequate depth to get below the zone of seasonal moisture variation. The rotary helical pier system's main advantage is that during installation no load is placed on the foundation, which makes it ideal for interior foundation repair. Helical piers will not normally achieve the depth of straight shaft pressed steel pilings.


 Pressed Pilings

Pressed Concrete Pilings provide a fast, relatively clean solution when compared with drilled piers. The system consists of pressed concrete pilings topped with a pier cap, concrete spacer, and steel shims.

The pressed concrete piling system requires a lot of lawn disruption when compared with steel piers. Typically, the hole required for this type of piling is twice that of a steel pier. The pre-cast 5000 PSI concrete pilings are mated with a steel bar.

The pilings are hydraulically driven to refusal using an installation force of up to 5000 PSI. The exact force that can be attained is limited by the weight of the structures. Studies have shown that due to the soil mechanics of friction and compression, this system will attain a support strength of twice its installation force within one month after pier installation. The system consists of pressed concrete pilings topped with a pier cap, concrete or steel spacers, and shims.

Pressed concrete pilings have been used to level tens of thousands of homes. Depth of the concrete piling system, and hence the ability to support the house, is dependent upon soil moisture and the extent of soil compression. When dry soil limits the depth, seasonal movement can occur and impact the stability of the foundation.


Other processes used in foundation repairs:

 Drilled or Poured Concrete Piers

Drilled or Poured Concrete Piers: Holes are drilled to a depth of 9-12 feet below the surface, and then filled with reinforcing steel and concrete. The pier shown is commonly called a double 8, that is, twin 8 inch columns. Angular spacing of the two legs is typically 5-15 degrees.

After allowing 4-7 days for the concrete to cure, the Poured concrete pier is topped with concrete spacers and shims as the house is leveled. This system may be used instead of steel piers when leveling the perimeter of pier and beam homes.

The pier system used under the interior of a pier and beam home may be as simple as re-shimming existing posts or block and pad systems. Sometimes new poured concrete piers are installed on the surface of the ground. Steel shims are placed at the top of the pier to adjust the house level.

Mud Jacking is commonly used to lift driveways and sidewalks and is less often used in concrete foundation repair. Mud jacking seldom provides satisfactory long term correction to foundation problems, since the process does not either reach down to the zone of seasonal soil stability or bedrock. In Dallas and Fort Worth, the seasonal zone of soil stability is normally considered to be at a depth of 10-12 feet below the surface. At this depth the soil moisture content remains relatively constant year around.

Mud jacking does not address the foundation problems that arise from inadequate soil compaction.

Most foundation companies will not provide a long term warranty for a foundation repair using mud jacking.

Spread Footings were used in the past for slab foundation repairs and have been proven to be less than satisfactory. The footing is typically installed directly under the beam as a poured concrete slab measuring 3'x3'x3'. Practice has shown that since the footing is in the highly expansive 3-5 foot soil depth, it may contribute to foundation upheaval and further foundation problems.

 

 cracks near doors Foundation Repair

 cracks in ceilings Foundation Repair

 cracks in walls Foundation Repair

 Foundation Repair methods

Repair Methods

  • Steel piers
  • Helical piers
  • Concrete piers
  • Soil injection
  • Mudjacking
  • Drainage
  • Tunneling
  • Root barrier

FIND OUT MORE  FIND OUT MORE

 Foundation Problem Signs

Foundation Problem Signs

  • Brick cracks
  • Sloping floor
  • Sticking window
  • Cracks in walls
  • Cracks in floor
  • Cracks in tile
  • Sunken floor
  • Bouncy floor (Pier & Beam)

FIND OUT MORE  FIND OUT MORE

 Foundation Repair Lifetime Warranty

Granite's Lifetime Warranty

All of Granite's foundation repairs are guaranteed by a fully transferable warranty. Our goal is to fix it right the first time and we stand behind our work. Learn more about our lifetime transferable warranty...

FIND OUT MORE  FIND OUT MORE

 Foundation Repair Blog

Granite Foundation Blog

Subscribe to RSS headline updates from:

GRANITE FOUNDATION REPAIR
IS A PROUD MEMBER OF:
 Foundation Repair Better Business Bureau  Foundation Repair Association  Foundation Performance Association  Foundation Repair National Associaton of Remodeling
Do I Have a Problem?

What Are My Repair Options?

Frequently Asked Questions

Why Choose Granite?

Foundation Problem Signs

Granite's Lifetime Warranty

Repair Methods

Testimonials

Financing/MC/Visa

Signs of Problems

Causes of Problems

Service Area

Maintenance Tips

Foundation Articles

Foundation Design

Why Repair Now?

 Foundation Repair facebook

Foundation Repair Forum

Sitemap


2012 Granite Foundation Repair, Inc.   |   All rights reserved Dallas:   972-412-2171   -   Fort Worth:   817-870-1381
All rights reserved. Any and all reproductions in whole or in part without the prior express written consent of Granite Foundation Repair Inc. is strictly prohibited.

Designed by UEI
(713) 412-6704
Webmaster Cree par UEI
(713) 412-6704