
C Channel Steel added to reinforce beam of pier and beam foundation
In the picture above, Granite Foundation Repair reinforced an existing structurally sound beam of a pier and beam foundation with C Channel steel. The repair enabled the addition of a second story to an 85 year old house.
Sadly, over the years we have seen countless budget repairs of the beams supporting pier and beam foundations:
- Treated wood has been replaced with untreated wood.
- Rugged but failed 6″ x 6″ beams that have cracked have been braced with inferior 1″ x 6″ whitewood
- Replacement beam sections abutting old wood with a sistered piece of whitewood.
These are all temporary fixes that end up costing the home owner a lot more to repair in the end. The inferior repairs will fail, leading to more cracking and sagging.
If the original beam has structurally failed, look closely for the reason. Original pier spacing too large? Increased loads on the beam due to remodeling Failure of a pier?
Did inadequate shim material compress, leading to the failure? Soft woods and sheet rock should never be used for shims in pier and beam foundations.
Replacement beams should be pressure treated for rot and termite resistance. Standard untreated lumber will quickly fail. Treated lumber is dark in color, while untreated lumber is quite light.
The replacement of a beam with pressure treated wood in a pier and beam foundation typically costs $40-$60/linear foot of wood, dependent upon beam size. A good beam repair in a properly maintained crawl space can provide 75-100 years of service. It is well worth the investment.

